the same method. Then, at the end of the book, I will give the geometrical proofs of the propositions.”
The following description will, I hope, give an idea of the general features of the mechanical method employed by Archimedes. Suppose that X is the plane or solid figure the area or content of which is to be found. The method in the simplest case is to weigh infinitesimal elements of X against the corresponding elements of another figure, B say, being such a figure that its area or content and the position of its centre of gravity are already known. The diameter or axis of the figure X being drawn, the infinitesimal elements taken are parallel sections of X in general, but not always, at right angles to the axis or diameter, so that the centres of gravity of all the sections lie at one point or other of the axis or diameter and their weights can therefore be taken as acting at the several points of the diameter or axis. In the case of a plane figure the infinitesimal sections are spoken of as parallel straight lines and in the case of a solid figure as parallel planes, and the aggregate of the infinite number of sections is said to make up the whole figure X. (Although the sections are so spoken of as straight lines or planes, they are really indefinitely narrow plane strips or indefinitely thin laminae respectively.)
The diameter or axis is produced in the direction away from the figure to be measured, and the diameter or axis as produced is imagined to be the bar or lever of a balance. The object is now to apply all the separate elements of X at one point on the lever, while the corresponding elements of the known figure B operate at different points, namely, where they actually are in the first instance. Archimedes contrives, therefore, to move the elements of X away from their original position and to concentrate them at one point on the lever, such that each of the elements balances, about the point of suspension of the lever, the corresponding element of B acting at its centre of gravity. The elements of X and B respectively balance about the point of suspension in accordance with the property of the lever that the weights are inversely proportional to the distances from the fulcrum or point of suspension.