the machine. The machine being then put in motion, the table axis will exhibit the successive values of the formula, corresponding to the substitutions of the successive whole numbers for the unknown quantity: at length the number exhibited on the table axis will be 0, which will evidently correspond to a root of the equation. By previous adjustment, the bell of the table axis will in this case ring and give notice of the exhibition of the value of the root in another part of the machinery.
If the equation have imaginary roots, the formula being necessarily a maximum or minimum on the occurrence of such roots, the first difference will become nothing; and the dials of that axis will under such circumstances present to the respective indices. By previous adjustment, the bell of this axis would here give notice of a pair of imaginary roots.
Mr Colebrooke speculates on the probable extension of these powers of the machine: 'It may not therefore be deemed too sanguine an anticipation when I express the hope that an instrument which, in its simpler form, attains to the extraction of roots of numbers, and approximates to the roots of equations, may, in a more advanced state of improvement, rise to the approximate solution of algebraic equations of elevated degrees. I refer to solutions of such equations proposed by La Grange, and more recently by other annalists, which involve operations too tedious and intricate for use, and which must remain without efficacy, unless some mode be devised of abridging the labour, or facilitating the means of its performance. In any case this engine tends to lighten the excessive and accumulating burden of arithmetical application of mathematical formulæ, and to relieve the progress of science from what is justly termed by the author of this invention, the overwhelming encumbrance of numerical detail.'
Although there are not more than eighteen figure wheels on each axis, and therefore it might be supposed that the machinery was capable of calculating only to the extent of eighteen decimal places; yet there are contrivances connected with it, by which, in two successive calculations, it will be possible to calculate even to the extent of thirty decimal places. Its powers, therefore, in this respect, greatly exceed any which can be required in practical science. It is also remarkable, that the machinery is capable of producing the calculated results true to the last figure. We have already explained, that when the figure which would follow the last is greater than 4, then it would be necessary to increase the last figure by 1; since the excess of the calculated number above the true value would in such case be less than its defect from it would be, had the regularly computed final figure been adopted: this is a precaution necessary in all numerical tables, and it is one which would hardly have been expected to be provided for in the calculating machinery.
As might be expected in a mechanical undertaking of such complexity and novelty, many practical difficulties have since its commencement been encountered and surmounted. It might have been foreseen, that many expedients would be adopted and carried into effect, which farther experiments would render it necessary to reject; and thus a large source of additional expense could scarcely fail to be produced. To a certain extent this has taken place; but owing to the admirable system of mechanical drawings, which in every instance Mr Babbage