The system of mechanical contrivances by which the results, here attempted to be described, are attained, form only one order of expedients adopted in this machinery;—although such is the perfection of their action, that in any ordinary case they would be regarded as having attained the ends in view with an almost superfluous degree of precision. Considering, however, the immense importance of the purposes which the mechanism was destined to fulfil, its inventor determined that a higher order of expedients should be superinduced upon those already described; the purpose of which should be to obliterate all small errors or inequalities which might, even by remote possibility, arise, either from defects in the original formation of the mechanism, from inequality of wear, from casual strain or derangement,—or, in short, from any other cause whatever. Thus the movements of the first and principal parts of the mechanism were regarded by him merely as a first, though extremely nice approximation, upon which a system of small corrections was to be subsequently made by suitable and independent mechanism. This supplementary system of mechanism is so contrived, that if one or more of the moving parts of the mechanism of the first order be slightly out of their places, they will be forced to their exact position by the action of the mechanical expedients of the second order to which we now allude. If a more considerable derangement were produced by any accidental disturbance, the consequence would be that the supplementary mechanism would cause the whole system to become locked, so that not a wheel would be capable of moving; the impelling power would necessarily lose all its energy, and the machine would stop. The consequence of this exquisite arrangement is, that the machine will either calculate rightly, or not at all.
The supernumerary contrivances which we now allude to, being in a great degree unconnected with each other, and scattered through the machinery to a certain extent, independent of the mechanical arrangement of the principal parts, we find it difficult to convey any distinct notion of their nature or form.
In some instances they consist of a roller resting between certain curved surfaces, which has but one position of stable equilibrium, and that position the same, however the roller or the curved surfaces may wear. A slight error in the motion of the principal parts would make this roller for the moment rest on one of the curves; but, being constantly urged by a spring, it would press on the curved surface in such a manner as to force the moving piece on which that curved surface is formed, into such a position that the roller may rest between the two surfaces; that position being the one which the mechanism should have. A greater derangement would bring the roller to the crest of the curve, on which it would rest in instable equilibrium; and the machine would either become locked, or the roller would throw it as before into its true position.
In other instances a similar object is attained by a solid cone being pressed into a conical seat; the position of the axis of the cone and that of its seat being necessarily invariable, however the cone may wear: and the action of the cone upon the seat being such, that it cannot rest in any position except that in which the axis of the cone coincides with the axis of its seat.
Having thus attempted to convey a notion, however inadequate, of the calculating section of the machinery, we shall proceed to offer some explanation of the means whereby it is enabled, to print its calculations in such a manner as to preclude the possibility of error in any individual printed copy.
On the axle of each of the wheels which express the calculated number of the table T, there is fixed a solid piece of metal, formed into a curve, not unlike the wheel in a common clock, which is called the snail. This curved