The conductor, of which the loss of charge was to be measured, was placed near the centre of the vessel A. It consisted of a narrow strip of metal with a gold-leaf attached. The strip of metal was fixed to the upper rod by means of a small sulphur bead. The upper rod was connected with a sulphur condenser with an Exner electroscope B attached to indicate its potential. The gold-leaf system was initially charged to the same potential as the upper rod and condenser by means of a fine steel wire which was caused to touch the gold-leaf system by the attraction of a magnet brought near it. The rate of movement of the gold-leaf was measured by means of a microscope provided with a micrometer eye-piece. By keeping the upper rod at a slightly higher potential than the gold-leaf system, it was ensured that the loss of charge of the gold-leaf system should not be due in any way to a conduction leakage across the sulphur bead.
The method employed by Wilson in these experiments is very certain and convenient when an extremely small rate of discharge is to